Part Number Hot Search : 
ZL30410 TLP81 1N5400 K2711 00BB7 2CL71 42HF140M 1N4085A
Product Description
Full Text Search
 

To Download UPG2008TK Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 PRELIMINARY DATA SHEET
NEC's L,S BAND ULTRA SMALL SPDT GaAs MMIC SWITCH UPG2008TK
FEATURES
* ULTRA SMALL 6 PIN RECESSED LEAD MINI-MOLD PACKAGE: Size: 1.5 x 1.1 x 0.55 mm * LOW INSERTION LOSS: LINS = 0.40 dB TYP at f = 1 GHz LINS = 0.60 dB TYP at f = 2.5 GHz
0.480.05 0.480.05
OUTLINE DIMENSIONS (Units in mm)
PACKAGE OUTLINE TK
* HIGH ISOLATION: ISOL = 25 dB TYP at f = 2.5 GHz
DESCRIPTION
NEC's UPG2008TK is a Single Pole Double Throw (SPDT)GaAs MMIC switch, developed for applications in the 0.5 to 2.5 GHz frequency range. This device is housed in NEC's ultra small "TK" plastic surface mount package. This 6 pin recessed lead mini mold package has a footprint that is over 50% smaller than conventional small size SOT-363 package types. Package height is also reduced by 39% by incorporating a flat lead style. These tremendous size reductions make this switch an ideal device for small size portable applications and modules. NEC's stringent quality assurance and test procedures assure the highest performance. consistency and reliability.
APPLICATION
* L, S band digital cellular or cordless handsets * PCS, Bluetooth, WLAN, and WLL applications
ELECTRICAL CHARACTERISTICS (Unless Otherwise Specified, TA = 25C, VCONT1 = 2.8 V and VCONT2 = 0 V or VCONT1 = 0V and VCONT2 = 2.8 V, ZO = 50, off chip DC blocking capacitor value, 51pF)
PART NUMBER PACKAGE OUTLINE SYMBOLS LINS PARAMETERS AND CONDITIONS Insertion Loss f = 0.5 to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz f = 0.5 to 2.5 GHz f = 0.5 to 2.5 GHz f = 0.5 to 2.5 GHz f = 1.0 GHz1 f = 1.0 GHz1 UNITS dB dB dB dB dB dB dBm dBm ns A 20 22 13 13 MIN UPG2008TK TK TYP 0.40 0.50 0.60 25 20 20 20 25 50 0.5 10 MAX 0.70 0.80 0.85
ISOL RLIN RLOUT PIN(0.1dB) PIN(1dB) tsw ICONT
Isolation Input Return Loss Output Return Loss
Input Power at 0.1 dB Compression Input Power at 1 dB Compression Switching Speed
Control Current, at VCONT = 2.8 V/0 V, no RF signal
Note: 1. PIN(0.1dB) or PIN(1dB) measured the input power level when the insertion loss increases to more than that of the linear range. All other characterisitics are measured in the the linear range.
California Eastern Laboratories
UPG2008TK ABSOLUTE MAXIMUM RATINGS1 (TA = 25C)
SYMBOLS VCONT PIN PT TOP TSTG PARAMETERS Control Voltage Input Power Total Power Dissipation Operating Temperature Storage Temperature UNITS V dBm W C C RATINGS -6.0 to +6.02 28 0.15 -45 to +85 -55 to +150
RECOMMENDED OPERATING CONDITIONS (TA = 25C)
SYMBOLS VCONT(H) VCONT(L) PARAMETERS Control Voltage High Control Voltage Low UNITS MIN V V +2.5 -0.2 TYP MAX +3.0 0 +5.3 +0.2
Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. | VCONT1 - VCONT2 | 6.0 V
EVALUATION BOARD
VC1
6P L2MM SW T.F. for J- Contacts Ver. 1
OUT1
TEST
CIRCUIT1
C1 1 2 6 C2 VCONT1 C1 IN VCONT2 C2
C2 C2 C1
OUT1
G2R
5 4
OUT2 C1
3
C1
Note: 1. VCONT1 = 2.8 V, VCONT2 = 0V or VCONT2 = 0 V, VCONT1 = 2.8V, off chip DC blocking capacitors value C1=51pF, C2 = 1000pF (Bypass), Using NEC standard evaluation board.
IN
C1
PIN CONNECTIONS & INTERNAL BLOCK DIAGRAM PIN CONNECTION DIAGRAM
PIN NO. 1 2 3 4 5 6 CONNECTION OUT1 GND OUT2 VCONT2 IN VCONT1
OUT2 VC2
TRUTH TABLE OF SWITCHING BY CONDITION OF VOLTAGE
VCONT1 LOW HIGH VCONT2 HIGH LOW IN-OUT1 ON OFF IN-OUT2 OFF ON
(Top View)
(Bottom View) 6 5 4 6 5 4 1 2 3
ORDERING INFORMATION
PART NUMBER UPG2008TK-E2 MARKING G2R QTY 5 kpcs Per Reel
G2R
1 2 3
Note: 1. Embossed tape, 8 mm wide, Pins 1,2,3 face perforation side.
Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
08/30/2004
A Business Partner of NEC Compound Semiconductor Devices, Ltd.


▲Up To Search▲   

 
Price & Availability of UPG2008TK

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X